價格：免費
更新日期：2020-08-04
檔案大小：97M
目前版本：1.0.7
版本需求：Android 5.0 以上版本
官方網站：https://airturn.com
Email：support@airturn.com
聯絡地址：1668 Valtec Lane Unit G Boulder, CO 80301
This is a new version released on April 27, 2020. More devices are supported and Android versions 6-10 are supported. Customer feedback has been incorporated. Contact support if you have any problems.
AirTurn Manager allows you to test your AirTurn's switches, change its output configuration, and update its software.
Supported AirTurn models include:
DUO 200
DIGIT 200
QUAD 200
BT200S-2
BT200S-4
BT200S-6
PED
PEDpro
DIGIT III.
TEST YOUR AirTurn: When you press a pedal/button on your AirTurn it will be highlighted on the image. You can also use your AirTurn to scroll when reading the manual or FAQ.
CONFIGURE YOUR AirTurn: Configure the keyboard/mouse/MIDI actions when a pedal/button is pressed for each of 7 modes, the repeat rate when you hold down a pedal, and how long before the AirTurn powers off when idle. (Note: MIDI is only in MODE 7)
UPDATE YOUR AirTurn: If a software update is available for your AirTurn you will be notified and provided with details of the update. If you choose to go ahead and update the software it will automatically be downloaded from the Internet and transferred to the device.
INSTRUCTIONS:
Connect your AirTurn device with AirTurn Manager on an Android phone or tablet:
1. Power on the AirTurn pedal by holding the power button for 2 seconds.
2. Open AirTurn Manager
3. Select the device model you’re trying to pair
4. Select your device from the list once it appears.
You can now configure your AirTurn pedal from the Setting menu, accessible via the gear icon in the upper right corner of the preview display.
To change device configurations, tap the gear icon in the upper right corner of the preview panel.
Port Configuration allows you to select a MODE to configure, then select a switch to assign actions. (MODE 7 is reserved for MIDI)
All changes are saved automatically.
